Electro-Dynamics, Inc. C5 and C4 Corvette brake components and adapters Note: This page is for components that typically utilize Porsche Turbo rotors with C5 calipers Click images to enlarge, press "back button" to return This is a 993 Porsche Turbo rotor mounted on an Electro-Dynamics, Inc. rotor hat, adapting it for C5 and C4 Corvette use. RH-001 Rotor Hat Adapter (Shown installed above) Advantages of using a Porsche Turbo rotor with Electro-Dynamics rotor hat adapter: 1. More mass to absorb heat 2. More vanes and internal surface area to dissipate heat 3. Drilled holes of the rotor are reportedly cored when cast to provide a more stable grain stucture. 4. A wider swept area is available when utilized with the Porsche Turbo caliper. RH-001: Front rotor hat adapter, steel, for the front of a C5, 1997-2002: $179.00/each These are digitally machined to adapt the Porsche Turbo rotor to the hub of the C5 Corvette. When assembled with the Porsche Turbo rotor below, the assembly is a bolt on operation. There is no repositioning of the C5 caliper! They are also suitable for the C4 Corvette, both front and/or rear, when utilizing Electro-Dynamics caliper adapters to install C5/Z06 front calipers. Instructions are included. These do not include the rotors or retainers, they are purchased separately. RH-002: Front rotor hat adapter, steel, plated, for the front of a C5, 1997-2002: $196.00/each These are digitally machined and are plated to inhibit corrosion. They adapt the Porsche Turbo rotor to the hub of the C5 Corvette. When assembled with the Porsche Turbo rotor below, the assembly is a bolt on operation. There is no repositioning of the C5 caliper! These rotor hats are also suitable for the C4 Corvette, both front and/or rear, when utilizing Electro-Dynamics caliper adapters to install C5/Z06 front calipers. These are the same adapters as the RH-001, but are plated. Instructions are included. These do not include the rotors or retainers, they are purchased separately. Inquire for special show polish and/or plating. RH-003: Front rotor hat adapter, stainless steel, for the front of a C5, 1997-2002: $284.00/each These are digitally machined and are made of stainless to inhibit corrosion. They adapt the Porsche Turbo rotor to the hub of the C5 Corvette. When assembled with the Porsche Turbo rotor below, the assembly is a bolt on operation. There is no repositioning of the C5 caliper! These rotor hats are also suitable for the C4 Corvette, both front and/or rear, when utilizing Electro-Dynamics caliper adapters to install C5/Z06 front calipers. These are the same adapters as the RH-001, but are stainless. Instructions are included. These do not include the rotors or retainers, they are purchased separately. Inquire for special show polish. PR-001: Porsche Turbo 993 front rotor only, used with Electro-Dynamics rotor hats above: $189.00/each These are the Porsche Turbo rotors that everyone has heard about. They are made for the Porsche Turbo, reportedly with precast holes for better grain structure. These are specific for the rotor hats (hub adapters above) to fit the hub of the C5 Corvette. These rotor when combined with the proper Electro-Dynamics rotor hat are also suitable for the C4 Corvette, both front and/or rear, when utilizing Electro-Dynamics caliper adapters to install C5/Z06 front calipers. These have the machined finish as from Porsche, and are not plated. Instructions are included. These do not include the rotor hats or retainers, they are purchased separately. RET-001: Rotor retainers and bolts, suitable for one rotor assembly, unplated. $28.00/kit The 10 retainers and 10 bolts necessary to mount 1 Porsche Turbo rotor PR-001 to either the RH-001, RH-002, or RH-003 Electro-Dynamics rotor hat. These are only sold with the purchase of a rotor hat and rotor from Electro-Dynamics. Price does not include the rotors or rotor hats, they are purchased separately. RET-002: Rotor retainers and bolts, suitable for one rotor assembly, plated. $39.00/kit The 10 retainers and 10 bolts necessary to mount 1 Porsche Turbo rotor PR-001 to either the RH-001, RH-002, or RH-003 Electro-Dynamics rotor hat. These are only sold with the purchase of a rotor hat and rotor from Electro-Dynamics. These are the same as RET-001, but have rust resistive plating. Price does not include the rotors or rotor hats, they are purchased separately. ASM-001: Assembly of Electro-Dynamics rotor hat to Porsche Turbo rotor. $33.00/rotor For those not having the time or capability to do the assembly, the assembly of 1 Porsche Turbo rotor PR-001 to either the RH-001, RH-002, or RH-003 Electro-Dynamics rotor hat. This is only available with the purchase of a rotor hat, rotor, and retainers from Electro-Dynamics. Price does not include the rotors, rotor hats, or retainers, they are purchased separately. This is a C5/Z06 front caliper with a Porsche Turbo rotor mounted on the front of C5 (1997-2002). There are no other adapters required for the C5. The caliper remains in its original position. The Porsche Turbo rotor is utilized with an Electro-Dynamics rotor hat, RH-001. (See above on this page for information about the hat adapter for the Porsche Turbo rotor). Note that it has the optional stainless steel brake pad cover, PC-01M, to cover the unsightly brake pad. (See page 1 for information concerning the mirror finished stainless pad covers). This is a C5/Z06 front caliper with a Porsche Turbo rotor mounted on the front of a late C4 (1988-96). This is utilizing an Electro-Dynamics, Inc. caliper adapter, either a BF004 or a BF005. (See page 2 for information about caliper adapters for the C4). The Porsche Turbo rotor is utilized with an Electro-Dynamics rotor hat, RH-001. (See above on this page for information about the hat adapter for the Porsche Turbo rotor). Note that it has the optional stainless steel brake pad cover, PC-01M, to cover the unsightly brake pad. (See page 1 for information concerning the mirror finished stainless pad covers). This is a C5/Z06 front caliper with a Porsche Turbo rotor mounted on the front of an early C4 (1985-87). This is utilizing an Electro-Dynamics, Inc. caliper adapter, either a BF001, BF002, or a BF003. (See page 2 for information about caliper adapters for the C4). The Porsche Turbo rotor is utilized with an Electro-Dynamics rotor hat, RH-001. (See above on this page for information about the hat adapter for the Porsche Turbo rotor). Note that it has the optional stainless steel brake pad cover, PC-01M, to cover the unsightly brake pad. (See page 1 for information concerning the mirror finished stainless pad covers). This is a C5/Z06 front caliper with a Porsche Turbo rotor mounted on the rear of an early C4 (1985-87). This is utilizing an Electro-Dynamics, Inc. caliper adapter, BR001, for mounting C5/Z06 front calipers on the rear of a C4.. (See page 3 for information about caliper adapters for the rear brakes on C4's). The Porsche Turbo rotor is utilized with an Electro-Dynamics rotor hat, RH-001. (See above on this page for information about the hat adapter for the Porsche Turbo rotor). Note that it has the optional stainless steel brake pad cover, PC-01M, to cover the unsightly brake pad. (See page 1 for information concerning the mirror finished stainless pad covers). Information concerning Electro-Dynamics, Inc. components and shipment. No warranty is stated or implied. This includes, and is not limited to: fitness, use, injury, loss, or purchasers application. All items for sale and information offered are for display or off road use only. Pricing as well as design and components subject to change. Plating is for rust inhibiting, unless premium service show polish and plating are purchased. There are no returns for plating. Rotors, rotor hats, caliper adapters, and calipers are sold separately. Packing and shipping for a set of 2 rotor hat adapters is $19 in the continental US. Packing and shipping for a set of 2 rotors is $38 in the continental US. If you wish to purchase these items, have questions, or suggestions, just push the Contact Us button at the left for phone, fax, and Email. Phone: 937-845-3348 Fax: 937-845-3685 Email: sales@electro-dynamics.com Free counters provided by Andale. Check out additional information on brake adapters and components by selecting the pages below. Page: